Wood Gasification Kuuma VaporFire 200
Well it's all about safety, high efficiency, and enhancing our environment when it comes to burning wood using a VaporFire. "Smokeless" burns say it all...
The VaporFire 200 is our smaller VaporFire furnace. The wood length is approximately 16" and requires seasoned wood that has an 18-28% moisture content. It has a single speed fan with approximately 450 CFM (cubic feet per minute). It is used basically as an add-on to your existing oil, gas, or electric furnace. It has an 8" round heat outlet. Some people have it stand alone in an area where no duct work or other furnace is available to connect into. It gives you a clean, safe, and automatic front to back burn that delivers very even heat for 8-10 hours per load followed by many hours of coals. Even heat results from the front to back burn principle in our VaporFire furnaces. It heats approximately 3,000 square feet.
If you're on the fence please click on the following links to watch why our products are so efficient and unique...
Click Here to visit our YouTube page and watch videos of our products.
Click Here to visit our Facebook page.
Kuuma VaporFire Add-On Model 200

Pictured above is the VaporFire 200 with an overall efficiency rating of 86.3%
Why Choose a Kuuma VaporFire 200?
-
No Visible Smoke up to 99% of the Time which means No Creasote
-
No Catalytic Converters
-
Logs Burn from the Front to the Rear
-
Natural Burning of the Logs under Controlled Condition
-
Tested by PFS Laboratory and Intertek for Emissions and Safety
-
Approved to UL #391 by PFS Corporation
-
Fireboxes are under warranty for 25 years. With brick lining to the ceiling and ceramic lining behind the fire brick it is designed for a lifetime. All the internal parts are made with stainless steel and are replaceable.
"Kuuma" principle - the logs burn from the front to the back. Primary air ignites only the amount of wood that will combust with the available oxygen within the fire chamber. Electronic control precisely regulates the amount of preheated air admitted into the fire chamber. Because the gases and volatile liquids burn at approximately 1000 degrees Fahrenheit it is important that the secondary air is preheated before it is introduced into the secondary zone. The fire burns with a nice soft low flame resulting in a highly efficient burn for a long period of time. You don't need a raging fire to produce a clean burn and useful heat.
VaporFire 200 Burn #1,2 Test Results
VaporFire 200 Burn #3,4 Test Results
VaporFire Add-On Model 200 (Rear View)

Pictured above is a rear view of the VaporFire 200
Pricing
Customer Testimonials
Real testimonials from our already satisfied customers...
If you already own one of our products and would like to express your thoughts, please send us an e-mail at lampmfg@gmail.com.
Click Here to visit our YouTube page and watch videos of our products.
Click Here to visit our Facebook page.
